I Priority A Channel Selection - Icom IC-F510 Instruction Manual

I Priority A channel selection

When one of the following operations is performed, the trans-
ceiver selects the Priority A channel automatically.
Priority A is selected when;
• Clear down signal is received/transmitted
- Set the "Move to PrioA CH" item as "Clear Down."
• Turning the power ON
The Priority A channel is selected each time the trans-
ceiver power is turned ON.
• Status call
The Priority A channel is selected when transmitting a sta-
tus call.
- Enable the "Send Status on PrioA CH" item in the MSK
configuration.
3
BIIS OPERATION
22