Table of Contents
Advertisement
Section 3: Operation
Slide Bars In Menus: The current value for a given parameter,
such as size or vertical stretch, appears to the left of its slide bar
icon (adjustment window). This number often expresses a
percentage, or it may have units associated with it (such as
pixels), depending on the specific option. Press L
down; both the number and the length of the bar change accordingly. Hold for continuous adjustment. Or press
E
to activate a slide bar text box for specific number entry via the keypad and then press E
NTER
(or press E
to cancel).
XIT
"Direct" Slide Bars: For quick access, to Gamma, Brightness, and Contrast slide bars without traveling the
menu system. Press Gamma, Brightness, or Contrast to display the contrast slide bar.
Use the arrow keys to adjust a direct slide bar, or press E
then E
or L
NTER
E
to save and return to your presentation.
XIT
NOTES: 1) You can still adjust a direct slide bar as usual if the display is turned off (see OSD or Menu
Preferences menu) — the slide bar just won't be visible. 2) A direct slide bar disappears if it is not used within
five seconds.
Check Boxes: Conditions are present if its adjacent check box
contains a check mark. To toggle the check box, highlight and press
E
, or highlight and use R
NTER
A
K
to clear. If a check box is numbered, enter its number
RROW
EY
to immediately toggle the check box.
Pull-Down Lists: To see a pull-down list of options available for a given parameter:
• Highlight the list and press E
-OR-
• Enter the menu option number
Use the U
A
P
RROW
choose an option from the list.
1.
Serial (RS-232 IN) Options
2.
Serial (RS-232 OUT) Options
Serial (RS-422) Options
3.
4.
Projector Address
5.
Network Routing
6.
Ethernet Settings
7.
Broadcast Key
8.
Front IR Enable
9.
Back IR Enable
10.
Wired Keypad Enable
If you prefer to quickly scroll through a list without first pulling it down, highlight the option and use L
A
K
or R
RROW
EY
NOTES: 1) Press L
list. 2) Press E
XIT
3-10
A
K
or R
EFT
RROW
EY
IGHT
A
IGHT
RROW
NTER
K
or D
A
EY
OWN
RROW
Communications
Separate
A
K
. Press E
IGHT
RROW
EY
A
K
or R
EFT
RROW
EY
while in a pull-down list to cancel any change.
/R
A
EFT
IGHT
RROW
and enter a specific number from the keypad,
NTER
A
K
to save (or E
RROW
EY
K
to check and L
EY
EFT
K
to navigate up and down within the list. Press E
EY
when the desired choice appears.
NTER
A
K
to jump between pages in an extra long pull-down
IGHT
RROW
EY
White Uniformity
1.
Left Side
K
to gradually adjust the setting up or
EY
to cancel). When you are done, press
XIT
Edge Blending
1.
Blending Enable
1.
Separate
2.
RS-232 and RS-422 Joined
3.
RS-232 and Ethernet Joined
4.
All Joined
J Series 2.0, 2.4, and 3.0 kW Setup Guide
020-100751-03 Rev. 1 (02-2014)
35.6
to save
NTER
to
NTER
EFT
Advertisement
Table of Contents
