Table of Contents
Advertisement
A P P E N D I X A
Remotely managing your system through a network interface
Password settings
This menu provides a security function that allows an administrator to manage projector use and
enable the Administrator Password function.
Submenu setting
Password
N O T E S
The first time you enable the password settings, the default password value is four
l
numbers, for example, 1234.
The maximum allowable password length is four numbers or letters.
l
If you forget the projector password, refer to Accessing the service menu on page 53 to
l
set the projector setting to factory defaults.
Simple Network Management Protocol (SNMP)
Your projector supports a list of SNMP commands as described in the management information
base (MIB) file. You can download this file by browsing to
the MIB files link in theHardware section for the SMART UF 70 projector.
The SNMP agent in your projector supports SNMP version 1 or 2. Upload the MIB file to your
SNMP management system application and then use it as described in your application's user
guide.
62
Description
When the password function is enabled, the administrator
password is required to access Web Management. Select
Disable to allow remote web management of the projector without
requiring a password.
smarttech.com/software
and clicking
Advertisement
Table of Contents
