PC-EFTPOS i5100 Manual page 9

3.2
i3070 EFTPOS PINpad
Installation Steps (RS232)
1. Plug the RJ connector of the RS232 data cable in to the back of the pinpad
2. Plug the power cable in to the power pack and then plug it into a power point
3. Connect the round power connector into the plug at the end of the RS232 data cable as shown
4. Plug the RS232 connector in to the PC Com Port that will be used for the PINpad
PC-EFTPOS-CBA i5100 / i3070 Guide
Supplied Equipment with terminal:

i3070 EFTPOS Pinpad terminal

Power pack and power cable

POS connector cable (USB data cable)
(Identified by label "CAB0226")

POS connector cable (RS232 data cable)
(Identified by label "CAB0225")
Page 9 15/12/2008