Card Read Test On Pinpad; Turn Pinpad Lock On/Off - PC-EFTPOS i5100 Manual

8.7

Card Read Test on PINpad

If you are experiencing difficulties reader cards, run this test to see if it is a hardware issue.

On the i5100 or i3070 terminal, press [Func] and then [2]

Enter the Managers password (by default is 000000) and then press [OK]

Press [1]
(Configure)

Press [5]
(Self Test)

Press [1]
(Card Reader Test)

Swipe your Card and repeat.
8.8

Turn PINpad lock On/Off

By default the i5100 or i3070 PINpad will turn on the pinpad lock if the terminal has not been in use for 10
minutes. After 10 mins, the pinpad will display the screen below (if configured with the External Display
option disabled). If External Display is enabled, then the bank logo will always be be displayed
COMMONWEALTH BANK
EFTPOS
PINPAD LOCKED
Once the pinpad has been locked, you will need to press any key on the pinpad and then enter the Manager‟s
password (by default is 000000) and press [OK], to turn the lock off.
To turn the pinpad lock on/off

On the i5100 or i3070 terminal, press [Func] and then [2]

Enter the Managers password (by default is 000000) and then press [OK]

Press [1]
(Configure)

Press [1]
(Pinpad Lock)

Press [1]
(Lock On/Off)

Press either the key under [ON] or [OFF] to turn the pinpad lock on or off
To configure the pinpad lock timeout (setting only works when pinpad lock is On)

On the i5100 or i3070 terminal, press [Func] and then [2]

Enter the Managers password (by default is 000000) and then press [OK]

Press [1]
(Configure)

Press [1]
(Pinpad Lock)

Press [2]
(Set Timeout)

Enter a number between 2 and 99 (mins)

The pinpad will then be locked if no key presses have been detected within the set time
PC-EFTPOS-CBA i5100 / i3070 Guide
(Terminal)
(Terminal)
(Terminal)
Page 24
.
.
.
15/12/2008