Terminal Functionality Supported by CBA
1.
1.1
Using PC-EFTPOS with a POS
When PC-EFTPOS is configured to be used with a POS, all the EFTPOS functionality is initiated through
the POS. Consult your POS vendor on the operation of EFTPOS through your POS.
The Ingenico 5110 pinpad can also be configured into Standalone Mode so the pinpad then acts as a fully
functional standalone pinpad. The i3070 is an integrated pinpad only.
1.2
CBA i5100 / i3070Specific Details
CBA Help Desk Number:
The terminal requires both a Terminal ID and Merchant ID to be entered.
The Terminal ID (CAT ID) is 8 digits long and the Merchant ID (CAIC ID) is 15 digits long.
CBA refers to the Merchant ID as the CAICID and the Terminal ID as the CATID
Dial-up system uses TPDU headers. NII is not required.
The terminal is required to perform a TMS logon before logging onto the CBA Host.
Argent Host addressing templates for the 5110 and i3070 are CB96NR for customer owned Argent
lines & CB9600 for CBA owned Argent lines
Argent ID provided by CBA is 7 digits long and the POS AME needs to be 10 digits long.
Functionality
EFTPOS Functionality:
Purchase
Cash Out
Refund
MOTO processing
Pre-Authorisation
Completion
PIN@Pos
Tipping
Training Mode
Balance Enquiry
Voucher Entry
Electronic Fallback (EFB) (SAF)
EMV processing
Contactless Card Acceptance - MasterCard PayPass Only
Settlement Options
Settlement
Pre-Settlement
Last Settlement
Sub-Totals
Summary Totals
Shift Totals
Hardware Options:
i5100 Terminal with printer and modem
i5100 Terminal without printer and without modem
i3070 Terminal with inbuilt contactless card (PICC) reader
External Contactless Card (PICC) reader for i5100
PC-EFTPOS-CBA i5100 / i3070 Guide
1800 022 966 (password "Integrated")
Page 5
15/12/2008