Pc-Eftpos Software Installation - PC-EFTPOS i5100 Manual

PC-EFTPOS Software Installation

5.
1. Install Terminal
See Hardware Installation
2. Install Software
If the POS does not have the latest PC-EFTPOS software installed, install the software from the PC-
EFTPOS installation CD, or the setup file available for download from our website at
www.pceftpos.com.au/files/releasecd
For more detailed information on installing the PC-EFTPOS software, please refer to the PC-EFTPOS EFT
Client and EFT Server Installation Guides, or call PC-EFPOS Helpdesk on 02 9998 9800
3. Configure Terminal
To configure the terminal, you can either enter the TID/MID ...
 Manually through the PINpad
o On the i5100 or i3070 terminal press [Func] and then [9]
o Type in your hidden password*
o Press [2] Application Config, Press [1] EFTPOS, Press [1] Details
o Press [1] CATID and then enter the Terminal ID (8 digits), followed by [OK]
o Press [2] CAIC and then enter the Merchant ID (15 digits), followed by [OK]
o Keep pressing the [Clear] button until you are out of the terminal‟s menus
*To obtain your hidden password, please call either CBA or PC-EFTPOS and have the
last 6 digits of the terminals serial number with you.
 From the PC-EFTPOS Client – Refer to section 7 of this document
o Double click on the Client icon to open it
o Click on the [Ctrl Panel...] button
o Click on the [Setup (F5)] tab and enter the Terminal ID (CATID) and Merchant ID (CAID)
o Press [APPLY] button. The confirmation password is 7410
OR
Consult your POS provider to see how the details are entered into the POS
4. Confirm TMS Settings
You should confirm with CBA that your PINpad is
further details.
If you are using the I5100 internal modem "Internal Modem" should be set on TMS.
If you are using the I5100 printer "Internal Print" should be set on TMS.
(Note: The "internal modem" and "internal printer" options are not available for the i3070)
5. TMS Logon
 On the i5100 or i3070 terminal press [Func] and then [2] Terminal.
 Enter in your Manager‟s password (this will be 6 zeros [000000] by default – Refer to section 13 if
this does not work).
 Press [1] Configure then
 Press [4] TMS Logon. The TMS logon will start. The TMS logon may take 5 minutes to complete.
6. Bank Logon
Open the PC-EFTPOS Client Control Panel and click on the [Logon] button from the [Eftpos (F2)] tab.
PC-EFTPOS-CBA i5100 / i3070 Guide
for PINpad in section 3 of this document.
(Version 4.3.0 or higher is required for i5100 or i3070 installations.)
PC-EFTPOS Client icon
configured correctly on
Page 14
TMS. – Refer to section 6 for
15/12/2008