Installing an OTI – Saturn 6000 Contactless Reader:
1. The Saturn 6000 needs to be connected to Comm Port 1 (RS232-1) of the 5110 pinpad, as it requires
power from this port
2. The PC EFTPOS integrated cable will need to move into Comm Port 2 (RS232-2) and use the PSU
supplied with the 5110 pinpad for power
Refer to section 8.1 of this document regarding instructions on how to change the Comm. Port for
PCEFTPOS
3. Plug in the Saturn 6000 reader before you power up the terminal.
4. Reader lights should flash, reader beeps and then the default screen shows on reader of "Welcome
Commonwealth Bank"
Common Errors:
"Enter Logo" on reader screen
Check reader is connected to Green RS232 Comm Port 1. Power the terminal off and on
Confirm software version is 3.26
"Terminal Dialling" shows in the terminal screen after a PayPass card is read, and before the screen shows
"Processing". Pre-Dial is not turned on. Call the CBA Help Desk and ask then to turn Pre-Dial ON. This error
will be for Dial Up comms lines only.
PC-EFTPOS-CBA i5100 / i3070 Guide
Page 8
15/12/2008