Pc-Eftpos Software Overview - PC-EFTPOS i5100 Manual

PC-EFTPOS Software Overview

7.
7.1EFT-Client Settings:
7.2 EFTPOS Control Panel
Press the control panel button on the Client settings page (above) to activate the control panel.
PC-EFTPOS-CBA i5100 / i3070 Guide
COM port: that the PINpad is
plugged into.
Printer: (Not used when POS is
printing). NPT denotes using
the internal printer of i5100
Host Interface: This is
normally blank or 127.0.0.1
It is the IP address of the
EFTSRV which is normally on
this machine. NPT indicates to
use the internal i5100 modem.
A separate phone line is
required for each PINpad using
the internal modem
Tracing: This is enabled by
default and records information
on the hard-drive to help us
track down any issues.
Logon: Performs a
logon to the host
Reprint: Reprints
last receipt
Diagnostics:
Provides reports on
s/w configuration
and version
Setup Page:
Enter terminal ID
(CATID) and the
Merchant ID
(CAICID).
Click APPLY and
then type 7410 as
the password and
click OK
Page 18 15/12/2008