Cba Tms - PC-EFTPOS i5100 Manual

CBA TMS

6.
Before attempting to log a terminal on, it is important that the Commonwealth Bank TMS is configured
correctly. The default settings from the bank are enabling – PC EFTPOS, External Display and Refund
Password.
To check the TMS parameters or for changes and any additional settings required please call
Commonwealth Bank Help Desk on 1800 022 966.
Below is a screen shot of the CBA EFTPOS Application tab from the CBA TMS.
 PC-EFTPOS Enabled – Please confirm that PC-EFTPOS has been enabled for each of your
individual Terminal ID‟s. You cannot log on the terminal if this has not been setup.
 External Display – Controls whether the logo or the standalone ready screen is displayed on the
terminal at idle. Also disables transaction initiation on the terminal. That is, if it is disabled, a
transaction can be started on either the POS or the terminal. If it is enabled, a transaction can only be
started on the POS.
 Internal Modem – For single terminals using a dial up phone line. If enabled, it will allow the
terminal to use its internal modem when transaction requests from the POS contain NPT for server
address. Anything initiated in the terminal, like an automatic settlement, will use this parameter for
using its own modem or EFT server comms.
NOTE: This must not be enabled for modem less terminals i.e i3070.
 Internal Print – If enabled will allow the terminal to use its internal printer when transaction
requests from the POS contain NPT for printer. Anything initiated in the terminal will print on the
terminal if this enabled. No printing will happen in that case if not enabled.
NOTE: This must not be enabled for printer less terminals i.e. i3070.
 Refund Password – If enabled, the terminal will enforce CBA host refund limits and passwords
(entered on the terminal). If off, refund limits and passwords are up to the POS, the terminal
performs no validation.
 POS Config- If enabled, the terminal can retrieve the Terminal and Merchant IDs from the POS.
(This parameter will be labelled as "POS Config" on the CBA TMS pane).
If disabled, then the Terminal and Merchant Ids will need to be entered manually. The default setting
for this parameter will be disabled.
PC-EFTPOS-CBA i5100 / i3070 Guide Page 16 15/12/2008