Table of Contents
Advertisement
Printing Data
Starting a Printing Operation
• When using a roll media, rewind the media by hand before printing so that it is not loose.When the roll
media has not been rewound tightly, it may cause the image quality to deteriorate.
1
Setting a Media (
2
Checking the Heater Temperature
• Check the CONSTANT lamp lights in [PRE], [PRINT], and
[POST] below the display.
3
Press the
• If the heater temperature has not reached the setting value, the
right screen is displayed.
Even if it has not reached, you can move to REMOTE when
pressing the
• The screen changes to REMOTE, and data can be received from
the PC.
4
Transmit data to be printed from the PC.
• The printing conditions are displayed.
• For the method of data transmission, see the instruction
manual for the output software.
5
Start printing.
2-38
P.2-5)
key in LOCAL.
key.
T EMP ERA T URE CON T RO L !
P L E A SE WA I T
Resolution : 600 /900 DPI
With/ without nozzle
recovery setting
* REMOT E *
6 0 0 x 9 0 0 R
6 . B d . N d . x 2
x x . x x m
The length of
media drawn
Scanning speed
x1 : Standard
speed
x2 : Double
speed
Data type
VD : Variable data
ND : Normal data
Scan direction
Ud : Unidirectional
Bd : Bidirectional
Number of passes
Advertisement
Table of Contents
