Table of Contents
Advertisement
If nozzle missing due to color mixture of ink or aeration
If nozzle missing occurs due to color mixture of ink in the head or aeration, push ink or air in the head out from
the port.
• Ink may drop from the nozzle during air ventilation. An operator should not leave this device during air
ventilation.
1
Select [AIR PG] of the maintenance menu.
(1) Press the
(2) Press
(3) Press
2
Press the
• The station moves downward to the empty absorption position.
• When it lowers to the empty absorption position, "Open Cover" is
displayed on the screen.
3
Open the right lower maintenance cover of this machine.
• When you open the right lower maintenance cover, the message
indicated in the right figure is displayed on the screen.
4
Open the maintenance cover before the carriage.
• After the work has been completed, attach the
removed cover as soon as possible. If you
leave it for a long time, UV light may affect ink.
5
Press the
6
Cover the rail part before the station with a waste
cloth etc.
• Be sure to cover the rail part before performing
the work. If ink drops on the rail part, ink will be
hardened and it may cause the operation
defect.
key in LOCAL.
to select [MAINTENANCE] and press the
to select [AIR PG].
key.
key.
Troubleshooting
key.
P L E A SE WA I T
Op e n C o v e r
COMP L E T ED
Maintenance cover
S E T T HE WA S T E C L OTH
COMP L E T ED
[ EN T ]
1
1
[ EN T ]
1
1
5
5-7
Advertisement
Table of Contents
