Table of Contents
Advertisement
Function name
INTERVAL WIPING (
P.3-15)
HEAD GAP (
)
P.2-5
*1. This is the setting value to be used for printing when setting value is not specified at the RIP software (host) side, or, you give priority
to the setting value at the machine side, even if you set "Host" to the type registration of this machine.
*2. When you set this to "100%" or more, required time for completion of printing will be shortened. However, enough drying time cannot
be ensured and it may affect the image quality.
Set value
Default
3 to 255 minutes
, OFF
OFF
1.5 to 7.0mm
2.0 mm
List of Functions
When no instruction
Outline
*1
from RIP exists
Sets the wiping operation during
printing.
Sets the head gap.
1
1
3
5
6
3-3
Advertisement
Table of Contents
