Discarding Waste Ink; If A Waste Ink Tank Confirmation Message Appears - MIMAKI UJV500-160 Operation Manual

Discarding waste ink

If a Waste Ink Tank Confirmation Message Appears

Ink used in head cleaning, etc. is stored in the waste ink tank on the lower right side of the machine. The sensor
monitors the discharged amount of ink in this machine. When that reaches a specified amount, the machine
displays a confirmation message. (When this message is displayed, consider the replacement of the waste ink
tank.)
Confirmation Message in LOCAL
1
The message on the right is displayed.
2
Check the state of the waste ink tank
• If [Waste ink tank none] is displayed, check if the tank is inserted all the way to the back.
Discard waste ink
• When you replace the waste ink tank, be sure to wear attached goggles and gloves to perform the
work. Otherwise, you may get ink in your eyes.
• If you get the ink on your skin or in your eyes, wash it away with plenty of water immediately.
1
Open the waste ink tank cover.
• Remove the screw attaching to the waste ink tank cover
and open the cover to the front.
2
Lift the waste ink tank a little.
• Lift the waste ink tank up to the position where it does not hit
the stopper.
4-20
< L OCA L >
Wa s t e i n k n e a r f u l l
or
< L OCA L >
Wa s t e i n k f u l l
or
< L OCA L >
Wa s t e i n k t a n k n o n e
Waste ink tank cover Screw
Stopper