Replacing The Cutter Blade - MIMAKI UJV500-160 Operation Manual

Replacing the Cutter Blade

The cutter blade is consumable.When the cutter blade gets dull, replace it with a new one (SPA-0192).
• The blade is sharp.Be careful not to hurt yourself or anyone else.
• Store the cutter blade in a place that is out of the reach of children.In addition, dispose of used cutter
blades according to regional laws and regulations.
• When replacing the cutter blade, it is recommended to place a sheet of paper under the cutter blade.
This will help pick up the cutter blade if it drops.
1
Press the
MAINT.
2
Press the
3
Press
4
Press the
• The carriage moves onto the platen.
5
Open the front cover.
6
Remove the maintenance cover at the front of the
carriage.
• Remove the screws of both edges of the maintenance
cover, and remove the maintenance cover.
key in LOCAL.
key.
to select [STATION MAINT.].
key.
Replacing consumables
CARR I AGE OU T
MOVE POS I T I ON
: S T A T I ON MA I N T .
MOVE POS I T I ON
: S T A T I ON MA I N T .
Front cover
Maintenance cover
Screw
[ EN T ]
1
1
1
4
4-23