Table of Contents
Advertisement
Item
Available temp.
Humidity
Guaranteed temp.
Recomended
Temperature change
Environment
Dust
Highest operation
height
Printer main unit
Weight
External ink supply
unit
Printer main unit
Outside dimen-
External ink supply
*5
sions
unit
*1. Without deflection of the roll when it is retained at both ends.
*2. "Involuted" for the media take-up direction is recommended.
*3. 65.1dB(A), Operating Condition: Full load Measuring Method: According to clause 1.7.4.2 of Machinery Directive 2006/42/EC
*4. Main unit and heater included.
*5. When take-up machine/ feeding machine are flat
Ink specifications
Item
Supply
Color
Ink capacity
Shelf life
Storage
Storage tempera-
ture
Transportation
Do not disassemble the ink bottle.
Ink could freeze if kept in a cold place for an extended period.
• If the ink freezes, thaw it at room temperature (25°C) spending more than three hours before
use.However, when you use the frozen ink, the printing quality becomes degraded due to altered
ink. Store ink in the environment where ink may not freeze.
Supply item list
Product No.
LUS20-C-BA
LUS-200 Cyan ink (1liter)
LUS20-M-BA LUS-200 Magenta ink (1liter)
LUS20-Y-BA
LUS-200 Yellow ink (1liter)
LUS20-K-BA
LUS-200 Black ink (1liter)
SPA-0188
Maintenance kit
SPA-0189
Carriage filter
SPA-0190
Mist filter
SPA-0192
Cutter blades
SPA-0193
Wiper kit
SPA-0195
Air pressure filter
SPA-0196
Ink filter white (for Extternal ink supply unit)
20 °C to 30 °C (68°F to 86°F)
35 to 65% Rh (No condensation)
20 °C to 25 °C (68°F to 77°F)
± 10 °C / h or less
3
0.15mg/m
(Equivalent to normal office level)
2000 m
800 kg
30 kg
3830 mm(W) x 1930 mm(D) x 1700mm(H)
777 mm(W) x 570 mm(D) x 830mm(H)
1L Ink bottle
Black ink
Cyan ink
Magenta ink
Yellow ink
White ink
1 liter
The period is printed on the ink bottle.
Within three months after opening the package even in the available period.
5 to 30˚C
1 to 60˚C (Storage at temperature of 60˚C is only permitted within 120 hours, and
at temperature of 40˚C is permitted within a month.)
Name
Product No.
SPA-0197
SPA-0211
SPA-0214
SPA-0219
SPA-0220
SPA-0222
SPC-0690
SPA-0223
SPC-0527
SPC-0568
Specifications
Specifications
Name
Waste ink tank
Air pressure filter kit
Washing bypass tube jig kit
F absorber kit
Air purge jig UJV
Post cure lump (1pc. Included)
Post cure lump (3pc. Included)
CAP absorber UJV kit
Clean stick for the surroundings of
the head 50pcs
Cleaning liquid for maintenance
Specifications
6
6-3
Advertisement
Table of Contents
