Names Of Parts And Functions; Front Side Of The Machine - MIMAKI UJV500-160 Operation Manual

Names of Parts and Functions

Front Side of the Machine

Left maintenance cover
Open the cover in maintenance.
Even when the power button is off,
keep all covers closed.
External ink supply unit
Set the ink bottle.
Ink bottle
Each bottle
contains an ink of
a particular color.
Take-up VTTS
Take up the output drawn with a
roll medium automatically.
Narrow Take-up device
Take up the output drawn with a roll
medium automatically.
1-4
Platen
The printed media is sent out, sliding on the platen. Three
heaters are installed inside the platen.
Print heater/ Pre-heater/ Post-heater
Fixes and dries the ink on the currently produced print.
(Located inside the platen)
Front cover
Open the cover in setting of medias, taking of measures
against jamming of medias or in maintenance inside the
station.
Even when the power button is off, keep this cover and the
other covers closed.
Post cure unit
The lamp unit to cure printed ink
Operation panel
This panel has the operation keys
required for operating the machine and
the LCDs for displaying setting items,
etc.
Upper right maintenance cover
Open the cover in maintenance.
Lower right maintenance cover
Open the cover in maintenance.
Waste ink tank
Waste ink gathers in this tank.
Clamp lever (front)
Moves the pinch rollers up and down to hold
or release the media.
Stand
Supports the main body of the machine.