Replacing Consumables; Replacing The Wiper - MIMAKI UJV500-160 Operation Manual

Replacing consumables

Replacing the wiper

The wiper is consumable.When the display indicates that it is necessary to
replace the wiper, immediately replace the wiper with a new one.
Also, wipe ink sticking to the lower surface of the slider off.
• A cleaning wiper (SPA-0193) is an option.Buy one through the dealer in your region or at our service
office.
1
When the message is displayed, press the
key.
2
Press the
• The carriage moves onto the platen.
3
Open the rght maintenance cover then remove the
wiper.
• Pull out the wiper by holding the protrusions at its both ends.
4
Insert a new wiper.
• Insert a new wiper by holding its both ends.
• There is no direction to the wipers. They can be inserted
with either side facing forward.
5
Close the lower right maintenance cover and press the
key.
• After its initial operation, the machine returns to LOCAL.
4-22
key.
• Until the replacement work is completed, [COMPLETED: ent] is displayed on the screen.
After the work up to the Step 3 is completed and you close the lower right maintenance
cover, press the
MAINT.
key.
< L OCA L >
R e p l a c e a WI P ER [ M N T ]
RE P L ACE WI P ER
E X ECU T E [ EN T ]
RE P L ACE WI P ER
COMP L E T ED [ EN T ]
Projection
Projection
* B e i n g I n i t i a l i z e d *
P L E A SE WA I T