Table of Contents
Advertisement
When Nozzle Clogging Cannot Be Solved
When nozzle clogging cannot be solved even after the head cleaning (
following two functions:
HEAD FILLUP
NOZZLE RECOVERY
Fill from the sub-tank to the head with ink
Fill from the sub-tank to the head with ink.
If air gets into the head, nozzle clogging can occur in a random location.
If this happens, perform the following operation.
1
Select [HEAD FILLUP] of the maintenance menu.
(1) Press the
(2) Press
(3) Press
(4) Press the
2
Press
fill.
3
Press the
• Start filling the head.
• When filling is complete, the screen on the right appears. Press
the operation returns to Step 2.
4
Press the
4-12
• Fill the head with ink. (
• Alternative nozzles for printing, when nozzles missing can not be improved.
(
P.4-13)
key in LOCAL.
to select [MAINTENANCE] and press the
to select [HEAD FILLUP].
key.
to select the sub-tank to
key.
, and then select "END" or "RETRY". If "R" is selected,
key several times to end the setting.
P.2-32) has been done, perform the
P.4-12)
key.
S E L EC T SUB T ANK
: MM_ _ _ _ _ _
* * F I L L I NG * *
HE AD F I L L UP
END <
P L E A SE WA I T
> RE TRY
Advertisement
Table of Contents
