Replacing The Waste Toner Container [B] - Fuji Xerox DocuPrint C4350 User Manual

5.5 Replacing Consumables
5.5.4

Replacing the Waste Toner Container [B].

Toner remaining on the drum after printing is gathered in the waste toner con-
tainer. When it is almost the time to replace the waste toner container, the mes-
sage [Ready to print Replace Bottle B] appears. Even after the message
appears, you can print about 900 pages normally. Check that a new waste toner
container is in stock during this time.
The replacement time of the waste toner container comes after printing about
22,000 pages. The printing stops until the waste toner container is replaced with
a new one. Confirm the waste toner container position on the Indicator at the left
of control panel and replace it.
The number of pages that can be printed varies depending on documents.
●
When replacing the waste toner container, use the cleaning rod packaged in the waste toner con-
●
tainer box to clean the Raster Output Scanners (D1, D2, D3, and D4) to prevent uneven color den-
sity during printing.
5
Never throw toner, a waste toner container, or a toner container into an
open flame. It can cause an explosion and you can get burnt.
Return used waste toner containers to our Customer Support Center for disposal.
●
Replace the waste toner container while the machine is on. Otherwise, print data remaining in the
●
printer and the information stored on the printer memory will be erased.
When replacing the waste toner container, toner may spill and dirty the floor. We recommend laying
paper on the floor beforehand.
142
L4
M Y
E K C
L3
A4
A1 A2 A3
5 Waste toner container
B
L2
1
L1
2
3
4