Fuji Xerox DocuPrint C4350 User Manual page 304

Description of Common Menu
Power Saver Mode
Set whether to automatically save power consumption by the machine after a given period. The
default is [Enable].
If power saver mode is [Disable], you cannot set sleep mode to [Disable].
"5.8 Using Power Saving Function" (P.179)
Power Save Timer (Note 1) (P.289)
Set the duration of time to switch the printer to the power saver mode in the range of 15 to 240 min-
utes incremented by 1 minute. In the power saver mode, the <Power Saver> button is lit. The default
is [15 Mins].
Sleep Mode
Set whether to use the sleep mode that saves power consumption more than the power saver mode.
The default is [Enable].
If power saver mode is [Disable], you cannot set sleep mode to [Disable].
"5.8 Using Power Saver Function" (P.179)
Sleep Mode Timer (Note 1) (P.289)
Set the duration of time to switch the printer to the sleep mode in the range of 15 to 240 minutes
incremented by 1 minute. In the sleep mode, the <Power Saver> button lights up. The default is [30
Mins].
"5.8 Using Power Saver Function" (P.179)
7 Auto Job History
Set whether to print automatically the job history report, which is the information about finished
print data.
If the memory becomes full when [Print] is set, the job history of the print data is automatically
printed in order of the 50 oldest print jobs that have not been output. The data under action and wait-
ing for action is not recorded.
The default is [Do Not Print].
2 Sided Report
Set whether to print the report/list data 1 sided or 2 sided. This is available when the duplex unit
(optional) is installed. The default is [1 Sided].
Printable Area
Set whether to extend the printable area. This is valid for printing by optional emulation ( HP-GL/2,
or PCL) and PostScript. The default is [Normal].
276