Printing On Non-Standard Size/Long-Size Paper; Loading Non-Standard Size Paper - Fuji Xerox DocuPrint C4350 User Manual

4.6
This section describes how to print on non-standard size paper such as long-size paper.
This printer supports the following paper sizes:
Non-standard size paper cannot be loaded in the optional tray 3 (large capacity) and optional tray 4 (large
●
capacity).
Long-size paper cannot be output to the finisher (optional) and side tray (optional).
●
4.6.1

Loading Non-standard Size Paper

4
This section describes how to load non-standard size paper.
For tray 5 (bypass tray)
The following procedure is an example for loading long-size paper in tray 5
(bypass tray).
To load non-standard size paper other than long-size paper, refer to "5.4.4 Loading Paper into
●
Tray 5 (Bypass)" (P.127).
Attaching the Banner Tray (optional) to tray 5 (bypass tray) allows you to load up to ten sheets of
●
paper with a long edge of up to 1200 mm. For more details, refer to the manual supplied with the
Banner Tray.
When printing on long-size paper, [High Resolution] cannot be selected in [Print Mode].
●
When printing on long-size paper, only [Heavyweight 1] can be selected in [Paper Type for Bypass
●
Tray].
58
Printing on Non-Standard
Size/Long-size Paper
For trays 1-4
Short edge
(vertical):
148 to 297 mm
Paper
feed
direction
Long edge (horizontal):
210 to 431.8 mm
For tray 5 (bypass tray)
Short edge
(vertical):
100 to 305.0 mm
Long edge (horizontal): 100 to 431.8 mm
Long paper size (431.9 to 1200 mm)
Paper
feed
direction