Using Power Saver Mode; Setting The Power Saver Mode - Fuji Xerox DocuPrint C4350 User Manual

Hide thumbs Also See for DocuPrint C4350:
Table of Contents

Advertisement

5.8

Using Power Saver Mode

This printer has two power saver features, low power mode and sleep mode, for suppress-
ing power consumption during standby.
By default, the machine moves to the low power mode when no print data is received for 15
min and then the sleep mode when no data is received for additional 15 min (30 min after
reception of the last data). Whether it is transferred to the low power and sleep modes and
the time to switch to these modes can be set from 15 to 240 min. The power consumption in
the sleep mode is 8 W or less and the time to return to ready to print from the sleep mode is
about 45 sec.
Upon transition to the low power or sleep mode, the green <Power Saver> button turns on.
To cancel the power saver mode, press the <Power Saver> button. When print data is sent
to the printer while it is in the low power or sleep mode, the power saver mode is automati-
cally cancelled and print process starts.
The power saver mode automatically lower the fuser temperature for saving power.
The sleep mode has the higher power saving efficiency. However, it takes more time to return to the ready to print
status compared to that of the low power mode.
Always set the low power mode to enable before setting the sleep mode.
You cannot disable both the low power and sleep modes.
When both the low power and sleep modes are set to enable, priority is given to the sleep mode. For example,
when the sleep mode transition time is set to 20 min and that of the low power mode to 45 min, transition to sleep
mode occurs 20 min after reception of the last data and the sleep mode continues even after 25 min without tran-
siting to the low power mode.
5.8.1

Setting the Power Saver Mode

Change the low power or sleep mode transition time settings on the control panel
or using CentreWare Internet Services.
The following describes how to set the power saver mode on the control panel.
When you use CentreWare Internet Services, refer to "5.1 Configuring the Printer from the Computer
(CentreWare Internet Services)" (P.98).
5
171

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents