Fuji Xerox DocuPrint C4350 User Manual page 294

Description of Common Menu
IPP
Set when using IPP.
■Port Startup
Set the status of IPP port to enabled or disabled when the power is switched on. The default is [Dis-
able].
Set to [Enable] when you use IPP.
To activate the IPP port, need to set the IP address.
If memory becomes insufficient when the port is set to [Enable], the status of the port may be automatically set
to [Disable]. Set the status of the unused port to [Disable], or change the memory allocation capacity at [Allo-
cate Memory], in case of insufficient memory.
■Print Mode (LOOK 1) (P.289)
Set the process method (targeted print language) of the print data.
The optional values are as follows:
[Auto] (default)
The proper process is automatically selected according to the language of the data received from the
computer.
[PS] [ESC/P] [HP-GL/2] [PCL] [TIFF]
Data received from the computer is processed.
■PJL (LOOK 2) (P.289)
With this printer you can use the PJL command, which does not depend on any print language. The
PJL command controls the print job, and is necessary when you use the print driver. Set the status of
the PJL command sent from the computer to enabled or disabled. By using the PJL command, you
can select the print language for the next data, even if the machine is under another process in any
print language. Set [Enable] for normal use. The default is [Enable].
■Access Control
Set the access control to enabled or disabled when canceling, deleting, or pausing a print job. The
default is [Disable].
7
■DNS
Set whether to use the name re-signed in the Domain Name System (DNS) as the printer is recog-
nized. The default is [Enable], which is used as the DNS name. When [Disable] is set, recognition is
processed under the IP Address.
■íAdd Port No. (Note 1) (P.289)
Set an additional port number from 1 to 65535. The default is [80].
■Connect Time-Out
While receiving print data, set the time from when the data is interrupted to when the connection is
cut, in the range of 0 to 65535 seconds, incremented by 1 second. The default is [60 Secs].
266