Fuji Xerox DocuPrint C4350 User Manual page 187

Error message
016-705 Cause: Secure print document cannot be registered, as
Action:
116-701 Cause: 2 sided print cannot be done, as the memory is
Action:
116-702 Cause: Alternative font is used for printing.
Action:
116-703 Cause: An error occurred in PostScript (optional).
Action:
116-710 Cause: It is possible that document size judgment is
Action:
116-711 Cause: The specified size and orientation of PCL form do
Action:
116-712 Cause: The form cannot be registered, as PCL form
Action:
116-714 Cause: An HP-GL or HP-GL/2 (optional) command error
Action:
116-715 Cause: The form cannot be registered, as the upper limit of
Action:
Cause and Action
extension hard disc is not installed.
The extension hard disc is required for using the
secure print function.
"4.8 Printing Confidential Documents/Printing after
Checking the Printout (Secure/Sample Print)"(P.68)
insufficient.
It is recommended to increase the memory
capacity.
Check the print data.
Action: Check the print data or set bidirectional
communication to off using spool setting of
<Advanced> tab of the print driver.
incorrect, as receive data exceeds the HP-GL, HP-
GL/2 (optional) spool size.
It is recommended to increase the allocated HP-GL
or HPGL/2 auto layout memory or install the
extension hard disc.
not match the print paper.
Correct the paper size and orientation according to
specified PCL form and then retry.
memory is insufficient.
Delete unnecessary forms and increase the PCL
form memory capacity.
occurred.
Check the print data.
PCL form registration has reached.
Delete unnecessary forms.
5.6 Printing Report/List
5
159