Fuji Xerox DocuPrint C4350 User Manual page 316

Description of Common Menu
Init/Del Data
You can initialize the printer settings stored in the NV memory, the internal Hard
Disk Drive, and report data, and delete data such as registered forms in the
printer.
Each value is set to default by the initialization. For information about the default, refer to "7.4 List of
Common Menu" (P.293).
NVM
Initialize the NV memory. The NV memory is a nonvolatile memory, which can store the contents
set in the printer, if the power is once switched off.
Each value in all functions is set to default by the initialization of the NV memory.
Hard Disk
Initialize the Hard Disk Drive (optional). The deleted data by the initialization are additional fonts,
each form in HP-GL, HP-GL/2, ESC/P, and PCL user defined data, SMB folder, security print docu-
ments, sample print documents, and time-specified print documents.
Logs of security prints, sample prints, and time-specified prints will not be deleted. This item is
available when the Hard Disk Drive (optional) is installed.
Delete All Data
Initialize the NV memory and the Hard Disk Drive (optional). Initializing the NV memory returns
the optional values of various items to default. Initializing the Hard Disk Drive deletes added fonts,
forms of HP-GL, HP-GL/2, ESC/P, and PCL, ESC/P user-defined data, SMB folder, and documents
of security prints, sample prints, and time-specified prints. The logs of security prints, sample prints,
and time-specified prints are not deleted.
If the Hard Disk Drive (optional) is installed, the processing time may become long (about one hour or more).
During processing, the lamp on the operation panel remains flashing. Do not turn the power off until a message
appears on the display after processing.
7
Print Meter
Initialize the output summary reports. Initialization clears the total counts to 0.
Job Counters
Initialize the job counters. Initialization clears the counter values to 0.
288