Fuji Xerox DocuPrint C4350 User Manual page 302

Description of Common Menu
SNTP Settings
Set the system clock of this machine by Simple Network Time Protocol (SNTP).
■NTP Synchronize
Set whether to set the clock of this printer in synchronization with the NTP server. The default is
[Off].
■Connect Interval
Set the NTP server connection interval in the range of 1 to 500 hour, incremented by one hour. The
default is [168 Hour(s)].
■ NTP IP Address (Note 1)(P.289)
Set the IP address of the NTP server to connect. The IP address input format is xxx.xxx.xxx.xxx.
xxx is a numeric value from 0 to 255. The default is [000.000.000.000].
A wrong IP address may cause trouble to the entire network.
HTTP-SSL/TLS
Set this to encrypt HTTP communication by using SSL or TLS. This item is available when a server
certificate is registered in this printer.
■Enabled/Disabled
Set whether to enable or disable encrypted communication by SSL or TLS. The default is [Off]. Set
[On] to encrypt HTTP communication data.
■Port No
Set a port number in the range from 1 to 65535. The default is [443].
7
274