Fuji Xerox DocuPrint C4350 User Manual page 59

Rear View
Never touch a labeled area found on or near the heat roller. You can get burnt. If a sheet of paper is wrapped around the heat
roller, do not try to remove it by yourself to avoid injuries or burns. Switch off the machine immediately, and contact our Cus-
tomer Support Center.
No. Name
14 Parallel interface connector
15 USB 2.0 interface connector
16 Network interface connector
17 USB 1.1 interface connector
18 Circuit breaker switch
19 Cover for printer options
20 Stopper
21 Toner cartridges
22 Handle
23 Drum cartridges (A1, A2,
A3, A4)
24 Waste toner bottle cover
25 Fuser (E)
3.1 Main Components and Their Functions
Internal View
This connector is used to connect a Centronics-compatible inter-
face cable which is connected to the computer.
This connector is used to connect a USB cable.
This connector is used to connect a 10Base-T/100Base-TX
Ethernet interface cable.
This connector is used to connect a USB 1.1 cable.
This switch turns off the printer automatically when electric leak
is detected.
Open this cover when installing an additional memory.
This stopper is used to lock the handle.
These cartridges contain four colors of toner (image-forming
agent); black (K), cyan (C), magenta (M), and yellow (Y).
Release the stopper and lower this handle when replacing a
drum cartridge.
These cartridges contain four photo conductors; colors of toner
(image-forming agent); A1, A2, A3, and A4 from left to right.
Open this cover when replacing the waste toner bottle (B).
This cartridge is used to fix the toner to the paper. Take care not
to touch this cartridge because it becomes very hot.
Description
3
31