Replacing The Waste Toner Bottle - Fuji Xerox Versant 3100 Press Printer Unit Manual

4.1.2

Replacing the Waste Toner Bottle

The Waste Toner Bottle collect residual toner left on the drum after printing.
When it is time to replace a Toner Bottle, a message appears on the Error Message area telling you that
the Toner Bottle should be replaced.
The printer displays a prior notice, prints about 5,000 sheets*, and then stops running.
*For detailed information about the number of printable sheets, refer to "4.1 Consumables" (p.60).
Never throw a Waste Toner Bottle into an open flame. Toner may catch fire and cause burn injuries or
explosion.
If you have a used Waste Toner Bottle no longer needed, contact your local Fuji Xerox representative
for its disposal.
Do not take out Waste Toner Bottles or tilt them around before they are filled up. The machine cannot mea-
sure accurately and toner may spill from the Waste Toner Bottle.
Important
Note When replacing a Waste Toner Bottle, toner may spill and soil the floor. It is recommended to lay paper on
the floor beforehand.
1.
Open the center cover of the printer unit.
2.
Pull out the Waste Toner Bottle about halfway.
3.
Gripping the bottle handle, take out the bottle from
the Tray.
4.
Put the used Waste Toner Bottle into the supplied plastic bag.
WARNING
Chapter 4 Maintenance
63