Error code
[Cause] PDF file cannot be printed by using Contents Bridge because of
[Action]
[Cause] The password of the PDF file is not consistent with the password
[Action]
[Cause] PDF file contains an LZW compression applied object. It cannot be
[Action]
[Cause] A PDF file cannot be printed unless printing is permitted.
[Action]
[Cause] The input password is incorrect.
[Action]
[Cause] Not registered as a service user department.
[Action]
[Cause] The number of printed pages reached the upper limit for service.
[Action]
Cause/action
insufficient memory.
When using the Contents Bridge Utility, change the [Print Mode] settings
in the [Contents Bridge] dialog box as follows:
If [High Quality] is selected, change it to [Standard].
●
f [Standard] is selected, change it to [High Speed].
●
"4.13 Printing PDF Files Directly (ContentsBridge)"(P.88)
●
When printing a PDF file by directly using the lpr command instead
●
of Contents Bridge, refer to "7.2.1 Print Language Setting" (P.258)
and change the setting on the control panel.
that is specified for the printer or the password that is specified by
the Contents Bridge Utility.
Specify the correct password for the printer or for the Contents
Bridge Utility, and try to print again.
printed unless the optional Contents Bridge Extension Kit is installed.
Try to print in the following way:
Open the PDF file from Adobe Acrobat Reader, and try to print
●
by selecting [Print] on the [File] Menu.
It is recommended to install the Contents bridge Extension Kit if
●
you intend to frequently print PDF files that contain an LZW
compression applied object by Contents Bridge.
Enable PDF file printing by using Adobe Acrobat, and try to print again.
Input the correct password.
Consult with the meter administrator.
Consult with the meter administrator.
6.5 List of Messages
247
6