Fuji Xerox DocuPrint C4350 User Manual page 186

5.6 Printing Report/List
5
158
Error message
016-726 Cause: When the print mode is specified to <Auto>, print
Action:
016-730 Cause: Unsupported command is detected.
Action:
Cause: Printing cannot be processed because of insuffi-
016-748
016-793
Action:
016-760 Cause: An error occurred during PostScript processing.
Action:
016-761
Cause: An error occurred during image processing.
Action:
016-762 Cause: Print language not installed is designated.
Action:
016-749 Cause: A text error occurred to PJL command.
Action:
Cause and Action
language cannot be selected automatically.
The possible causes are as follows:
PDF file is directly sent to the printer using LPR
without installation of built-in expansion hard
disc.
Installation of built-in expansion hard disc is
required.
Check the print data. Delete the command that
causes the error and then retry.
cient hard disc space.
Decrease the number of print pages by dividing the
print data or, if multiple number of copies are
printed, change to 1 copy.
Take one of the following actions:
Change the <Print Mode> to <High Quality>.
●
Increase the print page buffer.
●
Increase the memory using PostScript.
●
For information about <Print Mode>, refer to "4.10
Setting Print Modes" (P.76). For information about the
print page buffer and memory that uses PostScript, refer
to "1.5 About Allocation of Memories" (P.20).
Change <Print Mode> to <High Quality> and retry.
If the problem is still not corrected, use the page
print mode.
For information about <Print Mode>, refer to "4.10
Setting Print Modes" (P.76). For information about the
page print mode, refer to the on-line help of the print
driver.
Cause below is possible:
(1) HP-GL/2 or PCL data is sent while emulation kit
is not installed.
(1)Installation of emulation kit is required.
Check the print settings or correct the PJL com-
mand.