Fuji Xerox DocuPrint C4350 User Manual page 90

4.6 Printing on Non-Standard Size/Long-size Paper
Configuring the Print Driver Settings
To register non-standard paper sizes, use the [Custom Paper Size] dialog box.
Registering non-standard paper sizes as custom paper sizes allows you to select
them from [Paper Size] on the [Paper/Output] tab.
You can register up to 20 paper sizes and assign names to them. When mm is
used as the unit of measure, you can specify the short edge of paper within the
range of 100 to 305 mm in steps of 0.1 mm and the long edge of paper within the
range of 140 to 1200 mm in steps of 0.1 mm. When inch is used as the unit of
measure, you can specify the short edge of paper within the range of 3.94 to
12.01 inches in steps of 0.01 inch and the long edge of paper within the range of
5.5.1 to 47.24 inches in steps of 0.01 inch.
For Windows NT 4.0, Windows 2000, Windows XP, Windows Server 2003, only users with Admin-
●
istrator's rights can change the print driver settings. Without Administrator's rights, you can only
view the settings.
As a local printer uses the computer's form database, configuring the settings in the [Custom Paper
●
Size] dialog box on Windows NT 4.0/Windows 2000/Windows XP/Windows Server 2003 will affect
other printers used by the computer. For network printer, using the form database of the server
with a print queue will also affect the shared printer on the same network of other computers. For
Windows 95, Windows 98, and Windows Me, defining customized paper sizes for each printer icon
4
will not affect settings of other printers used by the computer. For network printers, defining cus-
tomized paper sizes for each printer icon will also not affect the shared printer on the same network
of other computers.
Procedure
1
Click [Start], select [Printers and Faxes], and then display the proper-
ties dialog box of the printer to be used.
Depending on the operating environment, click [Start], and then select [Settings] > [Printers].
2
Click the [Configuration] tab.
62