Fuji Xerox DocuPrint C4350 User Manual page 292

Description of Common Menu
NetWare
Set when using NetWare.
■Port Startup
Set the status of the NetWare port to enabled or disabled when the power is switched on. The default
is [Disable]. Set to [Enable] when you use NetWare.
When activating the port, the status of the port may be set to [Disable] due to insufficient memory. Set the
unused port status to [Disable] or change the memory allocation capacity at [Allocate Memory], in case of
insufficient memory.
■Transport Protocol
Set the Protocol of the transport levels of the NetWare. You can use either IPX/SPX or TCP/IP, or
both of them. The default is [TCP/IP, IPX/SPX].
To use TCP/IP, need to set the IP address both the computer and the machine.
■Print Mode (LOOK 1) (P.289)
Set the process method (targeted print language) of the print data.
The optional values are as follows:
[Auto] (default)
The proper process is automatically selected according to the language of the data received from the
computer.
[PS] [ESC/P] [HP-GL/2] [PCL] [TIFF]
Data received from the computer is processed.
■PJL (LOOK 2) (P.289)
You can use the PJL command with this printer, which does not depend on any print language. The
PJL command controls the print job, and is necessary when you use the print driver. Setting the status
of the PJL command sent from the computer to enabled or disabled. By using the PJL command, you
can select the print language for the next data, even if the printer is under another process in any print
language. Set [Enable] for normal use. The default is [Enable].
■No. of Search (LOOK 1) (P.289)
7
Set the number of times to search for the file server.
You can set from 1 to 100 per 1 time, or limitless. The searching interval is at 1 minute increments.
The default is [No Limit].
■TBCP Filter
Set the TBCP filter to enabled or disabled, while data from the PostScript is processed. The default is
[Disable].
264