Toshiba VN-M150HE Service Manual page 78

11
Remote controller sensor indicator (*1)
Displayed when the remote controller sensor is
used.
12
Pre-heat indicator (*1)
Displayed when the heating mode is energized or
defrost cycle is initiated.
While this indication is displayed, the indoor fan
stops or operate in fan mode.
13
No function indicator
Displayed when the function requested is not
available on that model.
14
Fan speed indicator (*1)
Indicates the selected fan speed:
(Auto)
(High)
(Medium)
(Low)
15
Louver Number display (*1)
(example:01, 02, 03, 04)
16
Power saving mode display (*1)
Displayed during capacity saving mode.
17
Louver lock indicator (*1)
Displayed when a louver is locked. (4-way
cassette type only)
18
UNIT No. indicator
The number of the Air to Air Heat Exchanger
selected using the UNIT button or that of the unit
in which an error has occurred.
19
Central control indicator
Displayed when a central control device such as a
central controller is also used. If the central control
18
22 19 16
15 17 14
20
77
20
11
12
device prohibits the use of local remote
controllers, blinks when any of the
or TEMP. buttons are pressed and the
operation is rejected.
The items controllable with the remote differ
depending on the mode of central control. Refer to
the owner's manual of the central control device
you are using for more information.
Operation mode controlled indicator (*1)
Displayed when MODE button is pushed while
operation mode is fixed to cool or heat by the air
conditioner administrator.
13
,