No.
Component
Fan (FAN)
1 - 10
8
Procedure
8. Release the big clamp (CLAMP) that fixes the
cords of the supply motor (MOTOR, SUPPLY)
and exhaust motor (MOTOR, EXHAUST).
9. Remove the screws that fix the motor holder
(HOLDER, MOTOR), hold the holder, then slide it
to the center of the product to remove it.
Note:
150 – 350 type
4 Screws (M5×8) used
500 – 1000 type
4 Screws (M4×6) used
4 Machine screws with captive washer (M8×16)
used
10.Remove the box nut, spring washer, and washer
(NUT) that fix the fan (FAN), then remove the fan.
Note:
For the 800/1000 type, do not lose the key and
washer left in the motor shaft.
Exhaust motor
(MOTOR, EXHAUST)
Screws (M5×8)
(150 – 350 type)
Screws (M4×6)
(500 – 1000 type)
Machine screws
with captive washer
(M8×16)
(500 – 1000 type)
800/1000 type
WASHER
150 – 650 type
NUT
53
Note
Supply motor
(MOTOR, SUPPLY)
Big clamp
(CLAMP)
Release
Machine screws
with captive washer
(M8×16)
(500 – 1000 type)
Screws (M4×6)
(500 – 1000 type)
Screws (M5×8)
(150 – 350 type)
Box nut
Spring washer
Washer
Washer
Box nut
Spring washer
Washer
Key