Toshiba VN-M150HE Service Manual page 126

4
Using TIMER time
SET DATA [
5
Push button. When the display changes
from flashing to lit, the setup is completed.
• To change settings of another indoor unit,
repeat from Procedure
• To change other settings of the selected indoor
unit, repeat from Procedure
Use button to clear the settings.
To make settings after
repeat from Procedure
6
When settings have been completed, push
button to determine the settings.
When button is pushed, "SETTING" flashes
and then the display content disappears and the
air conditioner enters the normal stop mode.
(While "SETTING" is flashing, no operation of the
remote controller is accepted.)
/ buttons, select
].
2
.
3
.
button was pushed,
2
.
125