Lighted Visor Mirror Replacement; Underhood Light Replacement - Hummer H1 Service Manual

______________________________________________________________________
10-84 Body

Lighted Visor Mirror Replacement

Removal
1. Pull mirror assembly from visor (Figure 10-168).
2. Remove lamp.
VISOR MIRROR LEAD
LAMP
MIRROR ASSEMBLY
REAR VIEW
Figure 10-168: Lighted Visor Mirror Replacement
Installation
1. Install lamp (Figure 10-168).
2. Install mirror assembly by pressing it into the visor.

Underhood Light Replacement

Removal
1. Disconnect two connectors from wiring harness
(Figure 10-169).
2. Remove two screws, washers, ground lead, bracket, and
light from hood.
3. Remove lamp from light.
Installation
1. Install lamp in light (Figure 10-169).
2. Secure light, bracket, and ground lead to hood with two
washers and capscrews.
3. Connect two connectors to wiring harness.
VISOR MIRROR
ASSEMBLY
LIGHT
GROUND LEAD
CONNECTORS
Figure 10-169: Underhood Light Replacement
Daytime Running Lights (DRL) Module
Replacement (Canada Only)
Removal
1. Disconnect the Daytime Running Lights (DRL) connector
from the harness assembly (Figure 10-170).
2. Remove two screws, washers, nuts, and DRL module from
the kick panel.
Installation
1. Secure DRL module to kick panel with two screws, wash-
ers, and nuts (Figure 10-170).
2. Connect the DRL connector to the harness assembly.
A-PILLAR
Figure 10-170: Daytime Running LIghts Module
LAMP
BRACKET
HOOD
HARNESS ASSEMBLY
DAYTIME RUNNING
LIGHTS CONNECTOR
DAYTIME RUNNING
LIGHTS MODULE
SPEED
NUT
LEFT OUTER
KICK PANEL
®