Hummer H1 Service Manual page 379

5-180 Transmission/Transfer Case
YOKE
NUT
SEAL
WASHER
Figure 5-167: Front Yoke Installation
43. Install drain plug in rear case. Tighten plug to 15-25 lb-ft
(20-33 N•m).
44. Apply Loctite PST to threads of indicator switches and
speed sensor.
45. Install indicator switches. Tighten switches to 15-25 lb-ft
(20-33 N•m).
46. Install speed sensor. Tighten sensor to 30-35 lb-ft (41-47
N•m).
47. Transfer case can be filled before or after installation in
vehicle. Tighten fill plug to 15-25 lb-ft (20-33 N•m) after
refill.
4-1-00
FRONT
OUTPUT SHAFT
FRONT
OUTPUT
YOKE
___________________________________________
®