Hummer H1 Service Manual page 880

_____________________________________________________
®
REMOTE ENTRY SYSTEM
Remote Entry Receiver Replacement
Removal
1. Remove front console enough to gain access to receiver
(Section 10).
2. Disconnect two receiver harness connectors from receiver
(Figure 12-109).
3. Remove receiver from two velcro strips.
ENGINE COVER
CONSOLE CONNECTOR
05745159
Installation
4.
5.
6.
7.
8.
Figure 12-109: Remote Entry Receiver
Electrical System
Install receiver on two velcro strips.
Connect receiver harness connectors to receiver.
Program receiver to accept remotes.
Check remote entry system for proper operation.
Install front console (Section 10).
REMOTE ENTRY MODULE
CROSS BODY HARNESS
9-S12-085
PCM
12-107
4-1-00