[Setup] Screen - Panasonic PX380G-BS300 Operating Instructions Manual

Corresponding button
<PLAY/PAUSE> button
<MONITOR SEL> button
[AUD03:MONI]
Selects the audio to be output to the speaker, the <PHONES> terminal, and the <AUDIO OUT> terminal.
r When audio channel 1/2 is selected
Corresponding button
<%/REW> button
<STOP> button
<MONITOR SEL> button
r When audio channel 3/4 is selected
Corresponding button
<%/REW> button
<STOP> button
<MONITOR SEL> button

[SETUP] screen

[SET01:TC/UB]
Sets the time code or user bits.
On the [HOME] screen, press the <COUNTER> button and select TC to display the time code setting screen and select UB to display the user bits
setting screen.
r Time code settings screen:
f To set the time code, press the <%/REW> button to change to the time code setting mode.
f The setting values of each digit of the time code are from [0] to [9] (decimal).
Corresponding button
<%/REW> button
Chapter 7 SmartUI operation — SmartUI menu list
[LVL]
Selects the method to adjust the recording level for audio
channel 4.
[CH1/2]
Toggles the audio input setting screen between CH1/CH2. Setting contents that switch in coordination are the same as the
[AUD01:LEVEL] screen.
[SEL1]
Selects the audio to be output to the speaker, the <PHONES>
terminal, and the <AUDIO OUT> terminal.
[SEL2]
Selects the audio to be output from the speaker, the
<PHONES> terminal, and the <AUDIO OUT> terminal when
[ST] is selected at [SEL1].
[CH3/4]
Toggles the audio monitor setting screen between CH3/CH4. Setting contents that switch in coordination are the same as the
[AUD01:LEVEL] screen.
[SEL1]
Selects the audio to be output to the speaker, the <PHONES>
terminal, and the <AUDIO OUT> terminal.
[SEL2]
Selects the audio to be output from the speaker, the
<PHONES> terminal, and the <AUDIO OUT> terminal when
[ST] is selected at [SEL1].
[CH1/2]
Toggles the audio monitor setting screen between CH1/CH2. Setting contents that switch in coordination are the same as the
[AUD01:LEVEL] screen.
[TCG]
Starts and exits the time code setting mode.
f The time code setting is applied when the setting mode exits.
Setting details and setting value
The setting contents are the same as audio channel 1.
Setting details and setting value
[CH1]
Monaural output from audio channel 1.
[ST]
Stereo output from audio channel 1 and 2.
[CH2]
Monaural output from audio channel 2.
f Factory setting: [ST]
[ST]
Stereo output from audio channel 1 and 2.
[MIX]
Mixed output from audio channel 1 and 2.
f Factory setting: [ST]
Setting details and setting value
[CH3]
Monaural output from audio channel 3.
[ST]
Stereo output from audio channel 3 and 4.
[CH4]
Monaural output from audio channel 4.
f Factory setting: [ST]
[ST]
Stereo output from audio channel 3 and 4.
[MIX]
Mixed output from audio channel 3 and 4.
f Factory setting: [ST]
Setting details and setting value
When the <%/REW> button is pressed, [SET] is displayed
in black and white inversion, and the time code setting mode
is set.
When the <%/REW> button is pressed again, [SET] returns
to the normal display, and the time code setting mode exits.
– 162 –