Recording Setup Screen - Panasonic AG-HPX500 Menu Information

RECORDING SETUP screen

Item
Selects the recording format for P2 card.
●59.94Hz System: 1080i/60i, 1080i/30P, 1080i/24P, 1080i/24PA, 720P/60P, 720P/30P, 720P/24P,
REC FORMAT
●50 Hz System: 1080i/50i, 1080i/25P, 720P/50P, 720P/25P, 720P/25PN, 576i/50i, 576i/25P
480i (576i)
Selects the 480i (576i) recording mode.
●DVCPRO50/DVCPRO DV
REC MODE
Selects the special recording mode.
REC FUNCTION
●NORMAL, INTERVAL, ONE SHOT, LOOP
Selects the one-shot recording time.
ONE SHOT TIME
●1F, 2F, 4F, 8F, 16F, 1s
Sets the interval time (INT) for interval recording (INTERVAL REC).
INTERVAL TIME
●2F, 4F, 8F, 16F, 1s, 2s, 5s, 10s, 30s, 1m, 5m, 10m
START DELAY Sets the START delay time for INTERVAL REC and ONE SHOT REC.
Sets PRE RECORDING to ON or OFF. (Fixed to 3 seconds for HD and 7 seconds for SD)
PREREC MODE
●ON, OFF
Selects the time code correction mode when recording the time code output by the internal time code
generator.
●DF: Uses the drop frame mode.
TC MODE
●NDF: Uses the non-drop frame mode.
The non-drop frame mode is used when a frame rate of 24P, 24PA, or 24PN is selected in a recording
format regardless of TC MODE setting.
Selects the user bits to be recorded when recording signals from a device connected to the TC IN
connector.
●ON: Records the user bits of the signal input to the TC IN connector.
●OFF: Records the user bits selected in the menu option UB MODE.
TC IN UB REGEN
• Setting this option to ON prioritizes the input signal over the settings made in the menu option UB
• No user bits are recorded when the input signal does not contain any user bits.
• Settings of the menu option UB MODE are used when no signal is input to the TC IN connector.
Set the content for user information.
●USER: Records the information of user.
●TIME: Records the time at recording.
●DATE: Records the date at recording.
●TCG: Records the values of the time code generator.
●FRM. RATE: Records the frame rate information for frame conversion.
a: Checking information for user information
UB MODE
b: Frame sequence No.
• 0 to 4 are displayed in 24P/24P (ADV) mode.
• F is displayed in 60i/30P mode.
c: Frame rates
• Frame rate (60/30/24)
• I/P ID
• Conversion data
• Frame rate coefficient
d: Recording management data
• Frame update information
• REC START/STOP information
114
Setup menu list
Description of settings (Items in bold are factory settings.)
720P/30PN, 720P/24PN, 480i/60i, 480i/30P, 480i/24P, 480i/24PA
MODE.
a b c d