Ipsec - Motorola WiNG 5.5 Reference Manual

5. Review the following VPN peer security association statistics:
Peer
Version
State
Lifetime
Local IP Address
Clear All
Refresh

13.3.24.2 IPSec

VPN
Use the IPSec VPN screen to assess tunnel status between networked peer.
To view IPSec VPN status for tunnelled peers:
1. Select the Statistics
2. Select System
connected access points
3. Select VPN and expand the menu to reveal its sub menu
4. Select IPSec.
Lists peer IDs for peers sharing security associations (SA) for tunnel interoperability. When a
peer sees a sensitive packet, it creates a secure tunnel and sends the packet through the
tunnel to its destination.
Displays each peer's IKE version used for auto IPSec secure authentication with the IPSec
gateway and other controllers or service platforms.
Lists the state of each listed peer's security association (whether established or not).
Displays the lifetime for the duration of each listed peer IPSec VPN security association. Once
the set value is exceeded, the association is timed out.
Displays each listed peer's local tunnel end point IP address. This address represents an
alternative to an interface IP address.
Select the Clear All button to clear each peer of its current status and begin a new data
collection.
Select the Refresh button to update the screen's statistics counters to their latest values.
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its
Figure 13-81 Access Point - VPN IPSec screen
items.
Statistics 13 - 123