Motorola WiNG 5.5 Reference Manual page 554

7 - 26 WiNG 5.5 Access Point System Reference Guide
NOTE: Only 2 AAA TACACS Authentication servers can be configured at a time.
9. Define the following settings to add or modify AAA TACACS authentication server configuration:
Server Id
Host
Port
Secret
Request Attempts
Request Timeout
Retry Timeout Factor
10. Click OK to close the Authentication Server dialog and save the changes. Click
configuration. Click
11. Click the Accounting
Figure 7-16 AAA TACACS Policy - New Authentication Server
Displays the numerical server index (1-2) for the authentication server when added to the
list available to the access point.
Specify the IP address or hostname of the AAA TACACS authentication server.
Define or edit the port on which the AAA TACACS server listens to traffic within the
access point managed network. The port range is 1 - 65,535. The default port is 49.
Specify the secret (password) used for authentication on the selected AAA TACACS
server. By default the secret is displayed as asterisks.
When a secret is entered, it must be confirmed in the Reconfirm text box.
Displays the number of attempts a client can retransmit a missed frame to the AAA
TACACS server before it times out of the authentication session. The available range is
from 1 - 10. The default is 3.
Specify the time for the access point's re-transmission of request packets. The default is
3 seconds. If this time is exceeded, the authentication session is terminated.
Specifies the interval, in seconds, between two successive re-transmission attempts.
Specify a value from 50 - 200 seconds. The default is 100 seconds.
Exit to close the Authentication Server dialog.
tab. The following screen displays:
Reset to revert to the last saved