Table of Contents
Advertisement
5 - 12 WiNG 5.5 Access Point System Reference Guide
6. If adding a new
NOTE: The
7. Within the
Range
range or double-click on an existing service alias range entry to edit it.
Protocol
Source Port
(Low and High)
Destination Port
(Low and High)
8. Select
OK
when completed to update the network service alias rules. Select
saved configuration.
Figure 5-7 RF Domain - Network Service Alias Add screen
Network Service
Alias, provide it a name up to 32 characters.
Network Service Alias Name
field, use the
+ Add Row
Specify the protocol for which the alias has to be created. Use the drop-down menu to select
the protocol (eigrp, gre, icmp, igmp, ip, vrrp, igp, ospf, tcp and udp). Select other if the protocol
is not listed. When a protocol is selected, its protocol number is automatically selected.
Note: Use this field only if the protocol is tcp or udp.
Specify the source ports for this protocol entry. A range of ports can be specified. Select the
Enter Range button next to the field to enter a lower and higher port range value. Up to eight
(8) such ranges can be specified.
Note: Use this field only if the protocol is tcp or udp.
Specify the destination ports for this protocol entry. A range of ports can be specified. Select
the Enter Range button next to the field to enter a lower and higher port range value. Up to eight
(8) such ranges can be specified.
always starts with a dollar sign ($).
button to specify the
Start IP
address and
End IP
address for the service alias
Reset
to revert the screen back to its last
Hide quick links:
Advertisement
Table of Contents
