Motorola WiNG 5.5 Reference Manual page 634

9 - 24 WiNG 5.5 Access Point System Reference Guide
2. Set the following parameters within the
Ignore BOOTP Requests
Ping Timeout
3. Refer to the Global DHCP Server Options
Use the + Add Row
the radio button of an existing global DHCP server option and select the
available.
Use the Type
string or Hex string. Highlight an entry from within the Global Options screen and click the Remove button to delete the
name and value.
4. Select OK to save the updates to the DHCP server global settings. Select
Figure 9-13 DHCP Server Policy screen - Global Settings tab
Configuration
Select the check box to ignore BOOTP requests. BOOTP requests boot remote systems
within the network. BOOTP messages are encapsulated inside UDP messages and are
forwarded. This feature is disabled by default, so unless selected, BOOTP requests are
forwarded.
Set an interval (from 1 -10 seconds) for the DHCP server ping timeout. The timeout is used
to intermittently ping and discover whether a client requested IP address is already used.
button at the bottom of the field to add a new global DHCP server option. At any time you can select
drop-down menu to specify whether the DHCP option is being defined as a numerical IP address or ASCII
field:
field.
Delete icon to remove it from the list of those
Reset to revert to the last saved configuration.