Motorola WiNG 5.5 Reference Manual page 394

5 - 308 WiNG 5.5 Access Point System Reference Guide
8. If creating a new VRRP configuration, assign a
identifier, the ID identifies the access point's virtual router a packet is reporting status for.
9. Define the following VRRP
Description
Priority
Figure 5-199 Device Overrides - VRRP screen
Virtual Router ID
General parameters:
In addition to an ID assignment, a virtual router configuration can be assigned a textual
description (up to 64 characters) to further distinguish it from others with a similar
configuration.
Use the spinner control to set a VRRP priority setting from 1 - 254. The access point uses
the defined setting as criteria in selection of a virtual router master. The higher the value,
the greater the likelihood of this virtual router ID being selected as the master.
from 1 - 255. In addition to functioning as numerical