Motorola WiNG 5.5 Reference Manual page 198

5 - 112 WiNG 5.5 Access Point System Reference Guide
18. Define the following settings for the new or modified
Transform Set
Authentication Algorithm
Encryption Algorithm
Mode
19. Select OK to save the changes made within the
configuration.
20. Select the Crypto Map
Use crypto maps (as applied to IPSec VPN) to combine the elements used to create IPSec SAs (including transform sets).
Figure 5-65 Profile Security - VPN Transform Set create/modify screen
If creating a new transform set, define a 32 character maximum name to differentiate
this configuration from others with similar attributes.
Set the transform sets's authentication scheme used to validate identity credentials.
Use the drop-down menu to select either HMAC-SHA or HMAC-MD5. The default
setting is HMAC-SHA.
Set the transform set encryption method for protecting transmitted traffic. Options
include DES, 3DES, AES, AES-192 and AES-256. The default setting is AES-256.
Use the drop-down menu to select either Tunnel or Transport as the IPSec tunnel type
used with the transform set. Tunnel is used for site-to-site VPN and Transport should be
used for remote VPN deployments.
Transform Set
tab.
Transform Set configuration:
screen. Select Reset to revert to the last saved