Motorola WiNG 5.5 Reference Manual page 422

5 - 336 WiNG 5.5 Access Point System Reference Guide
28. Set the following VLAN parameters to complete the MINT configuration:
VLAN
Routing Level
Link Cost
Hello Packet Interval
Adjacency Hold Time
29. Select OK to save the updates and overrides to the MINT Protocol configuration. Select Reset to revert to the last saved
configuration.
30. Select the Advanced Miscellaneous
Figure 5-217 Device Overrides - Advanced Profile MINT screen - Add VLAN screen
Define a VLAN ID from 1 - 4,094 used by peer controllers for interoperation when
supporting the MINT protocol.
Use the spinner control to define or override a routing level of either 1 or 2.
Use the spinner control to define or override a link cost from 1 - 10,000. The default
value is 100.
Set or override an interval in either Seconds (1 - 120) or Minutes (1 - 2) for the
transmission of hello packets. The default interval is 4 seconds.
Set or override a hold time interval in either Seconds (2 - 600) or Minutes (1 - 10) for
the transmission of hello packets. The default interval is 13 seconds.
menu item.