Mesh Point - Motorola WiNG 5.5 Reference Manual

13 - 30 WiNG 5.5 Access Point System Reference Guide
Portal Radio MAC
Connect Time
Refresh

13.2.10 Mesh Point

RF Domain Statistics
To view Mesh Point statistics for RF Domain member access point and their connected clients:
1. Select the Statistics
2. Select a RF Domain from under the
3. Select Mesh
The MCX Geographical View
The MCX Geographical View
provides a geographical overview of the location of each RF Domain member device.
4. Use the N, W, S and E buttons to move the map in the North, East, West and South directions respectively. The slider next
to these buttons enables zooming in and out of the view. The available fixed zoom levels are World, Country, State, Town,
Street and House.
5. Use the Maximize
status of the screen.
6. Select the MCX Logical View
Displays the hardware encoded MAC address for each radio in the RF Domain mesh
network.
Displays the total connection time for each listed client in the RF Domain mesh network.
Select the Refresh button to update the statistics counters to their latest values.
menu from the Web UI.
System
Point.
displays by default.
Figure 13-19 RF Domain - Mesh Point MCX Geographical View screen
screen displays a map where icons of each device in the RF Domain is overlaid. This
button to maximize this view to occupy the complete screen. Use the
tab to view a logical representation of the mesh point.
node on the top, left-hand side, of the screen.
Refresh button to update the