Locating A Device - Motorola WiNG 5.5 Reference Manual

4. Refer the following for more information on this screen:
Force Reload
Delay
Description
Current Boot
Current Boot Version
Next Boot
Next Boot Version
Fallback

12.1.3 Locating a Device

Devices
In large deployments with a large number of devices, it is very hard to identify a specific device. Use the device's locator feature
to find the device. Once configured, the device blinks its LEDs in a color that enables it to be identified amongst all other
deployed devices.
To locate a device:
1. Select the target device from the left-hand side of the UI.
Figure 12-14 Device - Reload screen
Select this option to force this device to reload. Use this option for devices that are
unresponsive and do not reload normally.
Use the spinner to configure a delay in seconds before the device is reloaded. Set this
value to 0 to reload the device immediately.
Use the text box to provide a brief description detailing the reason to reload this device.
Displays the current running firmware. Displays either primary or secondary.
Displays the firmware version number for the running firmware.
Displays the firmware that will be loaded on next boot.
Displays the firmware version number that will be loaded on next boot.
Displays the status of Fallback. Displays Enabled or Disabled.
Operations 12 - 11